Package Included: 1 Black Laptop Bottom Rubber Feet (4 pieces)
Compatible Models: Lenovo Thinkpad
X1 Carbon 7th Gen 20QD 20QE 20R1 20R2
X1 Carbon 8th Gen 20U9 20UA
Laptop Foot Pad Installation Guide
1. Preparation
1. Select the Appropriate Foot Pad
*Please confirm your laptop model and purchase the appropriate foot pad.
2. Preparation of Tools
*Fine-tipped tweezers or a thin-bladed knife (for removing the old foot pad).
*Alcohol swabs or a cleaning cloth (for cleaning the adhesive surface).
*New foot pad.
2. Removing the Old Foot Pad
1. Carefully peel off the old foot pad.
*Slowly peel off the old foot pad from the edge using tweezers or a knife, taking care not to damage the computer.
2. Note: If there is any adhesive tape or other fastening material remaining under the foot pad, remove it. This will affect the installation of the new foot pad.
3. Cleaning the Adhesive Surface
*Wipe the bottom of the laptop with an alcohol swab to remove any remaining adhesive or dust and ensure a secure adhesion for the new footpads.
3. Installing the New Footpads
1. Alignment
*Align the new footpads in their original positions (using the remaining old footpads and the indentations on the laptop as a reference).
2. Secure
*Peel off the protective film on the back of the new footpads and gently press them down for 10-15 seconds to ensure a firm adhesion.
*Key Check: Make sure each footpad is fully attached and that no edges are loose or floating.
4. Checking After Installation
1. Place the laptop on a flat surface and check that it is stable (adjust the position of the footpads if they are wobbly).
2. Make sure the footpads are at the same height and the laptop is not tilted.
[Notes]
1. Matching the Model
Make sure you purchase footpads that are fully compatible with your laptop model. Incompatible footpads may result in poor installation or adhesion.
2. Removal Tips
Forcibly removing the foot pads with a hard tool like a screwdriver may damage the laptop or the internal screw holes.
3. Installation Details
If you encounter resistance, check to see if any old adhesive tape or foreign objects remain.
After installing the new foot pads, avoid moving your laptop frequently for 24 hours and allow the adhesive to fully harden.
4. Environmental Conditions
Make sure your hands and the laptop are dry before installation. Adhesive strength will be reduced in humid environments.
Following the above steps will ensure a secure installation of the new foot pads, extending the life of your laptop and improving user comfort.
If you have any questions, please feel free to contact our customer service. Thank you for your cooperation.
Black Laptop Bottom Rubber Feet for Lenovo Thinkpad X1 Carbon 7th Gen 20QD 20QE 20R1 20R2, X1 Carbon 8th Gen 20U9 20UA (4-pack)
Pre-Purchase Instructions: Before purchasing, please confirm your required model and ensure the product you are purchasing is compatible. (See below for detailed information.) After confirming your model, please also verify that the part you have matches the product image. The product you receive will be the same as the image, so please check carefully.
*"Foot Installation Instructions and Precautions": 1. Completely remove the old feet to expose the mounting holes. 2. First, install the feet from both ends, firmly fitting them into the mounting holes on the PC. Next, align the center hole and press down to seal. Installation is complete.
Pre- and Post-Sales Support: If you have any questions before purchasing, please contact customer support at any time. If you have any questions or concerns after receiving the product, please contact customer support. Please rest assured that we will also provide a full refund.
Thank you for your continued patronage. Customer satisfaction is our top priority, and we will continue to provide even better service in the future. We appreciate your continued patronage.
