[Product Infomation]
Brand : Sanwa Supply
Materials : Plastic
[Product Description]
・This is a PoE injector that supports not only IEEE802.3af/at but also IEEE802.3bt (Class 7/Maximum 75W) power supply.
- Ideal for supplying PoE power to dome-shaped PoE cameras and wireless access points that consume large amounts of power.
・Signal transmission and power supply to PD (PoE power receiving compatible device) can be done using only LAN cable.
・Since it supports giga transfer, it is also ideal for transferring images from IP cameras, etc.
- Equipped with AUTO-MDIX function.
●This is a PoE injector that supports not only IEEE802.3af/at but also IEEE802.3bt (Class7/Maximum 75W) power supply.
●Ideal for supplying PoE power to dome-shaped PoE cameras and wireless access points that consume large amounts of power.
●For PDs (PoE power receiving compatible devices), signal transmission and power supply can be performed using only a LAN cable.
●Since it supports giga transfer, it is also ideal for transferring images from IP cameras, etc.
●Equipped with AUTO-MDIX function.
●Since it is a built-in power supply type, it can be installed by simply routing the power cable. ≪Caution≫
*Please use a Category 6 straight cable or one thicker than 24AWG/23AWG for PoE power supply.
Recommended cable (manufactured by Sanwa Supply)
・KB-T6POE series
・KB-T6ATS series
・KB-T5T series
*Please be sure to use PoE power supply only for PoE compatible devices (PD).
*Please check the required power before using for PD.
■Number of ports: 1 port
■Maximum transmission speed: 1000Mbps (1000BASE-T)
■Compliant standards: IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3ab (1000BASE-T), IEEE802.3af/at/bt
(*Class7/maximum 75W supply)
■Switching method: Store & Forward
■Communication mode: Full duplex/Half duplex
■Port configuration:
Data port (input)/1 port
PoE/Data port (output)/1 port
■PoE compatible port output: af standard/15.4W/1 port (maximum)
AT standard/30W/1 port (maximum)
bt standard/45W/1 port (maximum)
bt standard/60W/1 port (maximum)
bt standard/75W/1 port (maximum)
■PoE power supply method: Alternative A, Alternative B
■Compatible LAN cable:
During data communication/UTP category 5e or higher (1000BASE-T), UTP category 5 or higher (100BASE-TX), UTP category 3 or higher (10BASE-T)
For PoE communication/UTP category 5e/6/6A straight cable with a thickness of 24AWG or more
*Please use a PoE compatible LAN cable.
■VCCI standard: VCCI Class B
■Power supply: Built-in power supply
■Input voltage: AC100~240V±10% 50/60Hz
■Power consumption (maximum): Approximately 75W
■Power cable length: Approximately 1.5m
■Operating environmental conditions:
Temperature/0~40℃, Humidity/20~80% (no condensation)
■Environmental conditions during storage:
Temperature/-20~70℃, Humidity/10~90% (no condensation)
■Housing material: Plastic
■Wall hanging: Yes
■Set contents: power cable, instruction manual
■Color: Black
■Size: W193 x D85 x H41mm
■Weight: Approx. 415g
[Important Note - For Overseas Customers]
Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.
1. Legislation and safety standards
This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country.
Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.
2. About electrical products
[Voltage compatible]
When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.
[Plug type]
Our products use the Japanese plug type (A type or B type).
Please use a conversion adapter if necessary.
[Important notes regarding transformers and adapters]
A transformer adjusts the voltage to suit the requirements of the equipment.
Conversion adapters only change the shape of the plug and do not adjust the voltage.
Using only the conversion adapter without a transformer may damage the product.
[About responsibility]
We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.
3. Language and manual
Product instructions and displays may only be in Japanese.
The English version of the manual can be downloaded from our website.
