Youmile USB Logic Analyzer Device 24MHz 8 Channel UART IIC SPI Debug Mini USB Cable Dupont Cable 6 Colors Test Hook Clip Set for Arduino FPGA M100 SCM

--------------------------------------------------- 【Voltage Compatibility】 Our products are selected to support international voltage ranges (e.g. 100–240V). However, please make sure your local voltage is compatible before use, as incorrect voltage may still cause malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without appropriate voltage or equipment. --------------------------------------------------- [Product Introduction]: This is an inexpensive logic analyzer compatible with Saleae logic analyzer software. [Suitable for various occasions]: The logic sampling rate of each of the 8 channels is 24M/s, usually about 10M, which is sufficient for various occasions. 【Channel Value】: A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, and above 1.5V is considered high. Maximum Sampling Rate: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz. 【Automatic Analysis】: UART, SPI, IIC and other communication debugging gives you twice the results with half the effort. 24M sampling rate can automatically analyze UART, IIC, SPI and many other standard protocols. "Product Description This item is an inexpensive logic analyzer designed to be compatible with the Saleae logic analyzer software. Specifications: Works in 5V, 3.3V, 2.5V, 2.0V systems. May work at 1.8V but is not recommended Input Impedance: 1Mohm || 10pF (Typical, Approximate) Crystal: +/- 20ppm, 24MHz Error/Accuracy: Pulse Width Measurement: +/- 42ns (at 24MHz) Voltage Range: Input Voltage Range: -0.5V to 5.25V Input Low Voltage: -0.5V to 0.8V Input High Voltage: 2.0V to 5.25V Input Impedance: 1Mohm || 10pF (Typical, Approximate) Package Included: 1x Logic Analyzer 1x MINI USB Cable 1x 22PIN Female & Female DuPont Cable 12x Test Hook Clips