FNIRSI 2C23T Oscilloscope 2ch 10Mhz Bandwidth 3 In1 Digital Oscilloscope True RMS Multimeter Signal Generator Portable Sample Rate Rechargeable

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. [Oscilloscope] The 2C23T is equipped with a handheld oscilloscope function with 2 channels, 10Mhz bandwidth, and 50MS/s real-time sample rate. Equipped with complete trigger functions (auto, normal, single), maximum measurement voltage 400V, vertical axis sensitivity 200mv/div-10v/div, supports saving and exporting waveform images [Multimeter] The 4-digit 9999 true RMS digital multimeter 2C23T can measure AC voltage, DC voltage, DC/AC current, resistance, capacitance, temperature, diode, continuity measurements, etc. AC/DC voltage and resistance can be measured automatically by simply pressing the AUTO button. [Signal generator] Outputs 7 types of waveforms including sine wave, square wave, triangle wave, full wave, half wave, noise wave, DC wave, etc., has a waveform output frequency of 2MHz, and the output amplitude can be adjusted from 0.1 to 3.3 V [Compact design] 2C23T combines three functions into one unit: oscilloscope + multimeter + signal generator. Hardware ARM + FPGA + ADC with greater flexibility, more powerful waveform capture, and more detailed waveform display. You can also DIY a startup page for a change of pace. [Useful features] This is a small, lightweight, and portable oscilloscope. Built-in rechargeable lithium battery, can standby for 6 hours when fully charged. Equipped with an overvoltage protection function with a built-in ceramic fuse. It has a storage capacity of 32kb and supports Type-C interface. When connected to a computer, saved images and waveforms can be read in BMP format. [Japanese manual] PDF Japanese manual is available. If you contact FNIRSI, we will send you a PDF Japanese instruction manual. How to contact: Select the applicable order in "Order History" → Click "Problems with Order" → Click "Contact Seller" → Enter your question and click "Send" oscilloscope parameters Number of channels: 2 channels Sampling rate: 50MS/s Bandwidth: 10Mhz Time base: 50ns-10s Vertical sensitivity: 20mv/div-10v/div(x1) Trigger type: edge trigger Waveform storage, PC checking possible multimeter parameters True RMS value: 4 digits 10000V Measurable: AC voltage, DC voltage, DC/AC current, resistance, capacitance, temperature, diode, continuity measurements Signal generator parameters 7 types of waveforms: sine wave, square wave, triangle wave, full wave, half wave, noise wave, DC wave Output frequency: 1Hz-2MHz Output amplitude: 0.1 to 3.3V Display: 2.8 inch (320*240) Size: 14.17×9.35×3.8 Weight: 300g