About this item:
1. Design for changing the car battery, even by using the alternative 12V power source from another car if you do not have a jump starter at hand, Connection protection. If the power supply is incorrect polarity, the power supply will not be connected to your car.
2. 8A fuse built into the memory, more reliable for overload protection, Powered by any jump starter with a 12V output into an OBD II memory saver.
3.1. Insert the OBd2 plow to replace the battery. 2. Connect the other side and then connect a 12V power supply. If the light on the cable is easy, replacing the battery is not a problem. When I replace the battery, please do not turn on the power, do not turn on the power, and the display shows' insert battery '.
4. You can avoid these problems with this simple memory when replacing your car battery. This device can work with any 12V DC power source, including jump starter, DC 12V lead-acid battery or the DC 12V socket of another car.
5. The OBD2 to cigarette lighter is 3 m long, very easy to use. Simply plug the cigarette fire plug into another car and insert it into the 16 pin plug into the OBD port of the car you want to replace the battery.
Product description
Features:
1. Increase through each jump starter with a 12V output into an OBD II memory saver.
2. Interface connection between a 12V DC power source and the OBD II port of the vehicle.
3. Store vehicle codes and electronic presets.
4. With this simple memory when replacing your car battery, you can avoid these problems.
5. This device can work with any 12V DC power source, including jump starter, DC 12V lead-acid battery or other car DC 12V socket.
Product specification:
Item weight: 340g
Note:
1. The 12V DC plug of the memory should be connected correctly to the 12V power source, if not, the red light on the plug does not light up.
2. If the power source is from another car, please check whether the car cigarette lighter is in good condition or not.
3. If the power source is from a jump starter, then check if the cause is out of contact.
4. If the power source comes from an alternative 12V lead-acid battery, then check whether the polarity is true or not.