Ok Grunau Baby Model [Oke 12178]

Product Name OK Model Grunau Baby [OKE-12178]

Brand Introduction OK Model proudly presents the quality and technical expertise of RC models manufactured in Japan, offering the best flying experience for aspiring pilots.

Product Description The second iteration of the semi-scale glider under 100g, "Grunau Baby". The actual Grunau Baby was developed in Germany in 1931 and over 6000 units were produced across 20 countries as a representative pre-war trainer. The OK Model has not only scaled down to about 1/15 but also developed a structure and strength allowing for flight under 100g.

The wing supports, which significantly affect flight performance, are intentionally omitted. It can be modified and assembled as a display model. As a super small laser-cut balsa kit, it requires precise craftsmanship with a 7% wing thickness rib structure. Enjoy a light flight while respecting the manners while utilizing ridge soaring from the wind.

The kit does not include some linkage parts. The aircraft in the photo is an example that has been assembled and covered with film.

Usage Instructions Assemble the kit to complete the flying preparation, and after gathering the required additional parts for the airplane, proceed to fly it.

Main Specifications - Length: 474mm - Wing Span: 930mm - Wing Area: 7.5dm2 - Weight: 95-99g - Radio: AL2, EV, RD - Difficulty Level: Intermediate - Advanced - Completion Status: Balsa assembly kit

Precautions The assembly requires various levels of skills and experience. The flying weight can significantly change depending on the type and amount of glue used, types of coverings, mounted mechanisms, and linkage parts. Registration of the aircraft is mandatory if the weight exceeds 100g.

Essential Additional Items: - Airplane transmitter and receiver - Servos Tahmazo TS-D0602(48919)x2 (for ailerons) - Servos Tahmazo TS-D1102(48905)x2 (for elevator, rudder) - Digital sub-micro servos capable of driving with a single-cell LiPo - Battery 1-cell LiPo battery Tahmazo LP-1S1P250RE, - Covering film (recommended E-light 345) - Iron for film application - Instant glue, epoxy glue - General tools and stickers (can be downloaded from support page)

To request a return or exchange, please note that it is mandatory to provide a video of the unpacking of the package.