TAMIYA Electric RC Car Series Toyota Hilux 4WD High Lift 58519 1/10 No.519 (RN36)

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. This is an electric radio control car assembly kit that reproduces the Toyota Hilux (RN36), a four-wheel drive pickup truck that gained a lot of support in the 1980s, mainly in the United States, but also in Japan, and is still very popular today. Equipped with an assembled 3-speed transmission using a 540 motor on a ladder frame similar to the actual vehicle, you can enjoy light gear changes while driving using RC operation. The suspension is a rigid type with a metal axle housing positioned using leaf springs and oil dampers, and a radius rod at the rear.A metal under guard is also installed at the front to support tough riding. [Basic specifications] ●Total length 525mm, total width 278mm, total height 244mm, vehicle weight approximately 3.2kg. ●Tread = front 200mm, rear 218mm ●Wheelbase = 287mm ●Tire width/diameter = 60/123mm front and rear ●Motor = RS540 type ● Drive method = Vertical motor shaft drive 4WD ●Differential gear system F/R both = 6 pinion gear differential ●Damper = Oil damper both front and rear ●Gear ratio = Low 1:54.63 (4WD) Second 1:40.49 (2WD) Top 1:27.92 (2WD) ●Controller = ESC specification (sold separately) *[What you need to purchase separately] In addition to the Fine Spec 2.4G 4-channel radio (transmitter/receiver set), 2 servos and an ESC are required. 4 AA batteries for transmitter